Self-aligning top roller bearing type 5T000 |
|
Self-aligning top roller bearing type 5T000 |
|
|
The table below shows all
key dimensions of the 5T000 series self-aligning top roller bearings. The bearing is available with integral stop for tiller steered boats and without stops for boats with a steering system. Click on the pictures for a larger view. |
|
  |
|
Self-aligning top bearing series 5T000 with integral stops. |
||||||
PART NO. |
RUDDER SHAFT dia. |
BODY dia. D |
FLANGE dia. F |
HEIGHT H |
WEIGHT |
WORKING LOAD (max) |
5T035STP |
35 mm |
75,5 mm |
109 mm |
50 mm |
0,4 kg |
1280 kg |
5T040STP |
40 mm |
75,5 mm |
109 mm |
50 mm |
0,4 kg |
1320 kg |
5T050STP |
50 mm |
95,5 mm |
139 mm |
62 mm |
0,6 kg |
2450 kg |
|
Self-aligning top bearing series 5T000 without integral stops available in steps of 1 mm. |
||||||
PART NO. |
RUDDER SHAFT dia. |
BODY dia. D |
FLANGE dia. F |
HEIGHT H |
WEIGHT |
WORKING LOAD (max) |
5T030-5T044 |
30-44 mm |
75,5 mm |
109 mm |
50 mm |
0,4 kg |
1000-1400 kg |
5T045-5T060 |
45-60 mm |
95,5 mm |
139 mm |
62 mm |
0,6 kg |
1900-2500 kg |
5T061-5T082 |
61-82 mm |
133 mm |
169 mm |
75 mm |
0,9 kg |
3400-4600 kg |
5T083-5T104 |
83-104 mm |
153 mm |
198 mm |
75 mm |
1,2 kg |
5200-6400 kg |
| The applications for the 5T000 series bearing: |
| The 5T000 series bearings are low-cost self-aligning top bearings for light to medium loaded applications. As there is no aluminium inner housing between the rollers and the ball, the working load is lower that the 4SF000 type bearings. These bearings can be used in applications with relative bigger diameter rudder shafts like aluminium and carbon rudders. This type of top bearing can also be used on tiller steered boats. The rudder head will rest on the delrin ring, achieving on this way the vertical locking. A special type of the 5T000 series bearing (5T...STP) with integral stops in combination with our tiller heads is available in 35, 40 and 50 mm. When the yacht has a steering system, a locking ring on top of the bearing will take care of the vertical locking. The disadvantage of this bearing is the fact that the top of the rudder stock and locking ring will stand out above deck. If this is not acceptable, one should choose the bearing type 4S000Z. |
